These KNS Precision AR15 M16 Gen 2 MOD 2 Trig Ham Pins Non-Rotating
- P/N: NRTHPMOD2-154-Black Diameter: .154
- P/N: NRTHPMOD2-154-FDE Diameter: .154
These KNS Precision AR15 M16 Gen 2 MOD 2 Trig Ham Pins Non-Rotating are the Generation 2 Mod 2 pin sets. They are the STRONGEST pins that can be produced and were designed to withstand the high impact of full and semi-automatic 9mm and .223 suppressed weapons. They will also fit the .308 AR rifles.
The KNS Precision AR15 M16 Gen 2 MOD 2 Trig Ham Pins Non-Rotating are stainless steel. End retainers are black oxide.. An absolute must-have for all M-16 owners. KNS Precision AR15 M16 Gen 2 MOD 2 Non-Rotating Trig Ham Pins will also protect your AR-15. Special anti-creep retainers prevent wear on your irreplaceable M-16 or AR-15 receiver.
- Pin installation tool & 2 Allen wrenches included.
- No modification to firearm required.
THE TORQUE SPEC ON THE SCREW IS 11 inch/lbs. MAXIMUM.
IMPORTANT NOTE: The external width of some AR receivers may vary in the trigger/hammer pin area depending on the manufacturer. Our pins may be shortened a small amount by carefully filing material evenly from both ends of the pins. The being too long will not affect the function or performance.
The only difference from the Gen 2 pin kit is the appearance of the sideplates. There is no strength difference.
PLEASE READ the INSTRUCTIONS!!! Over-torquing the screws can casue damge to these sideplates.